DSO nano V2-S (DIY kit oscilloscope )

DSO nano is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is base on ARM Cortex™-M3compatible 32 bit platform, equipped with 320*240 color display, SD card capability, USB connection, and chargeable batteries. Weighs only 60g.

 

 

Features:

 

Display	2.8″ Color TFT LCD
Display Resolution	320×240
Display Color	65K
Analog bandwidth	0 - 200kHz
Max sample rate	1Msps 12Bits
Sample memory depth	4096 Point
Horizontal sensitivity	1uS/Div~10S/Div (1-2-5 Step)
Horizontal position	adjustable with indicator
Vertical sensitivity	10mV/Div~10V/Div (with ×1 probe)
	0.5V/Div~100V/Div (with ×10 probe)
Vertical position	adjustable with indicator
Input impedance	>500KΩ
Max input voltage	80Vpp (by ×1 probe)
Coupling	DC
Trig modes	Auto, Norma, Single, None and Scan
Functionalities:	Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage
	Precise vertical measurement with markers
	Precise horizontal measurement with markers
	Rising/falling edge trigger
	Trig level adjustable with indicator
	Trig sensitivity adjustable with indicator
	Hold/run feature
Test signal	Built-in 10Hz~1MHz (1-2-5 Step)
Waveform storage	SD card
PC connection via USB	as SD card reader
Upgrade	by bootloader via USB
Power supply	3.7V Chargeable Lithium battery / USB

 

• DSO PCBA x 
• Mini Probe x 1
• Manual X1

 

Option list:

• 3.7v lithium battery with connector x 1 (Only extra pay $4 , you can get this item .)

 

 

Note: Only the battery shows on the below pictures is not included !