14–17 мая курьером949 ₽
15–17 апреля в пункт выдачи1 477 ₽
17–19 апреля почтой1 477 ₽
Вернём деньги, если не получите заказ через 75 дней после отправки.
Похожие товары
- Товар пока без отзывов — купите сейчас и расскажите о нём всё
Описание
Suitable For Raspberry Pi Series Boards
* for reference only, the Raspberry Pi is NOT included.
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Using Blue Charged Particles To Produce Six Primary Colors, And Employing Dithering Technology To Create Vivid And Saturated Full Color Images.
The Resolution Is Up To 200ppi, Features A Wider Range Of Operating Temperature And Faster Screen Refresh Time. And It Is More Power-Saving, Aligning With ESG Trends For Energy Efficiency And Carbon Reduction
E Ink Spectra 6 is a newly launched full color e-paper technology that brings fresh vitality to the e-paper industry with excellent color performance, high resolution and high contrast.
Adopts red, yellow, and blue as the primary colors, it offers more possibilities for e-paper color display, featuring high contrast and high saturation to make images clearer and colors brighter.
Spectra displays are made of millions of Microcups which suspend the four different colored particles in clear fluid.
By applying a negative charge the red particles rise to the top and become visible
A split charge raises blue particles to the top and become visible
OPERATING VOLTAGE |
Raw display: 3.3V |
DISPLAY COLOR |
E6 full color |
with Driver HAT: 3.3V/5V |
|||
INTERFACE |
3-wire SPI, 4-wire SPI |
GREY SCALE |
2 |
OUTLINE DIMENSIONS |
Raw display: 284.70 × 208.80 × 0.85mm |
FULL REFRESH TIME |
19s |
e-Paper driver HAT: 65.00 × 30.50mm |
|||
DISPLAY SIZE |
270.40 × 202.80mm |
TOTAL REFRESH POWER |
<0.5W |
DOT PITCH |
0.169 × 0.169mm |
STANDBY CURRENT OF RAW DISPLAY |
<0.01uA (almost none) |
RESOLUTION |
1600 × 1200 pixels |
VIEWING ANGLE |
>170° |
Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (e-Paper driver HAT circuit diagram, examples for Raspberry Pi / Arduino / ESP32 / STM32)
-
Optional for e-Paper Driver HAT:
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards
Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
Adapting SPI interface for connecting with controller boards like Arduino / ESP32 / STM32 / Raspberry Pi, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
13.3inch e-Paper (E)
raw display, without driver board
13.3inch e-Paper HAT+ (E)
with e-Paper Driver HAT
Size
13.3 Resolution
1600×1200Viewing Angle
>170°Display Color
E6 full colorGrey Scale
2Communication
SPIDisplay Panel
E-paperExperience
Paper-likeEnvironment
Ambient Light RequiredDisplay Type
Passively ReflectiveHAT+ Standard
Improves interoperability
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
On E-Paper Driver HAT
For Use With Controller Boards Like Arduino / ESP32 / STM32 / Raspberry Pi
VCC |
3.3V/5V |
GND |
Ground |
DIN |
SPI MOSI pin |
SCLK |
SPI SCK pin |
CS_M |
e-paper M area chip selection, low active |
CS_S |
e-paper S area chip selection, low active |
DC |
Data / Command selection (high for data, low for command) |
RST |
External reset, low active |
BUSY |
Busy status output |
PWR |
Power control pin |
About Maojiexin, we specialize in providing high-precision GNSS/GPS modules, development boards, and electronic components to a global clientele. With a focus on innovation and quality, our solutions power industries ranging from automotive to IoT, supporting applications in agriculture, smart cities, and more. Our dedicated team is committed to delivering reliable products and exceptional service, ensuring that your projects succeed with precision and efficiency. Trust us to be your partner in navigating the future of technology.
Q: What s your advantage?
