почтой
пункт выдачи
курьером
Вернём деньги, если не получите заказ через 40 дней после отправки.
3800 u.
13 августа 2022
экспресс | 4 axis USB
Товар пришёл раньше срока, к компьютеру подключил, настроил, все хорошо.
MHCN CNC Store
16 августа 2022
Если у вас есть какие-либо вопросы, вы всегда можете связаться со мной! С нетерпением ждем нашего следующего сотрудничества!
dima_chuvak d.
28 апреля 2022
экспресс | 4 axis USB
Нареканий нет, работают оперативно, полный комплект, заслуженные 5 звезд.
MHCN CNC Store
3 мая 2022
hi friends, thank you for your support! If you have any follow-up questions, you can always contact me.
Oleg M.
21 февраля 2022
Китай | 5 axis USB
Все отлично. Хороший продавец. Рекомендую.
MHCN CNC Store
26 февраля 2022
Спасибо за вашу поддержку и доверие к нам, мы будем продолжать усердно работать! С нетерпением ждем нашего следующего сотрудничества!
RU s.
6 марта 2023
Китай | 5 axis USB
Все пришло, все работает!!!
MHCN CNC Store
9 марта 2023
Спасибо за поддержку и с нетерпением жду следующего сотрудничества.
OLEG Y.
6 ноября 2024
Китай | 5 axis USB
Alexander B.
23 мая 2023
экспресс | 4 axis USB
Evgeny B.
11 декабря 2022
Китай | 4 axis USB
5919 u.
12 октября 2022
Китай | 4 axis USB
Дополнен 16 октября 2022
Спасибо заказ пришел быстро и хароший, я доволен.
4 axis USB mach3 controller board
Description:
1. Support for 4-axis linkage, you can connect for stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. Support automatic probe tool
4. Support Emergency input
5. Support for limit switch
6. Support for connecting electronic handwheel
7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
11. 1 status LED, indicate connection status on the board
Size: 8x7.7cm/3.15x3.03inch
Quantity: 1 Set
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents:
1 x 4 axis USB CNC Controller Card
1 x USB cable
(Do not include CD, Please contact us for MACH3 File)
Option:5 axis USB
5 axis USB mach3 controller board
1. Support for 5-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc. 4. Support for connecting electronic handwheel;
5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
7. 1 status LED, indicate connection status on the board.
Package Contents
1 x 5 axis USB CNC Controller Card
1 x USB cable
(Do not include CD, Please contact us for MACH3 File)
Option:5 axis DB25
5 axis DB25 mach3 controller board
Features:
1. Full support for MACH3 and other computer software supporting parallel port control.
2, USB power supply and peripheral power supply are separated to ensure computer security.
3. External wide voltage input, 12-24V, and anti-reverse connection function.
4. All input signals are isolated by optical fiber, which can be connected to emergency stop, tool setting, limit, etc. to ensure computer safety.
5. One relay output port can control the spindle switch. The output is P17.
6. A 0-10V analog voltage output isolated by the optocoupler can control the inverter with the corresponding analog interface and the spindle speed. The output is P1.
7, open all 17 ports, can be connected to the driver with optocoupler, can control 5-axis stepper motor.
8. P1 is used as PWM output, which can control the spindle governor with optocoupler input.
9, can be connected to the common negative or common driver, the input level is 5V driver.
10. Print all port names at a glance.
Package Contents:
1 x 5 axis DB25 CNC Controller Card
1 x USB cable
1 x DB25 cable
Option:4 axis USB
Option:5 axis USB
Option:5 axis DB25
Используя этот сайт, Вы выражаете согласие на сбор и обработку Ваших персональных данных, в том числе с привлечением сторонних сервисов, с применением cookie-файлов и средств анализа поведения пользователей, согласно нашей Политике о персональных данных. Вы принимаете условия нашего Пользовательского соглашения.