BARROW LTPRP-04I / FBLTPRP-04I водяное охлаждение процессора

Product update announcement:

Recently, Barrow has gradually updated the Intel series CPU block. If you have received a new version of the product, please use it normally. The new version has better compatibility. If it is a little different from the picture/description and the information cannot be updated in time, the real object shall prevail

ATTENTION: Please follow the video method to inject the liquid into the block.

Put the block vertically and shake the block to exhaust the air out to avoid idling the engine.

Must install a filter on the water inlet to avoid pump clogged.

Purchase information

1. The water blocks need to match with corresponding controllers before they can be used. When purchasing, please make sure to purchase the required controller;
2. Must install the filtration device on the water inlet, avoid to clog water blocks;
3. When installing, please pay attention to the inlet and outlet position of water blocks, errors in installation will affect heat dissipation efficiency;
4. The water injection port must be connected to the hose before water injection;
5. Correctly use the inlet, outlet, and water injection ports to quickly complete the water injection operation;
6. When installing the water block, the fixing screws must be installed diagonally;
7. When installing, if the fitting interferes with the water pump due to the size of the fitting, it can be solved by adding a 20mm extension joint;
8. Product appearance structure will be upgraded without a prior notice, and the material object prevails.